Repository Universitas Pakuan

Detail Karya Ilmiah Dosen

Mochamad Yunus

Judul : Size Reduction of Printed Antenna Based on Spiral Resonator Incorporated with Matching Circuit for Performance Enhancement

Abstrak :
The development of wireless communication system
often requires the device with compact size and light weight. To
satisfy the requirement, the device should comprise of small parts,
in which one of them is using printed antenna. Many researches
on size reduction of printed antenna have been conducted. By
using spiral resonator (SR) shape incorporated with matching
circuit, in this paper, the size reduction of printed antenna is
presented which is aimed to enhance the antenna performance.
The proposed antenna is designed using two layers of 1.6mm
thick FR4 dielectric substrate with a proximity coupled technique
applied as the feeding system. It is found that the proposed
technique offered the proposed antenna to have the ð‘†11 value
of 25dB, the bandwidth of 40MHz, and the gain achievement of
2.3dBi. This is better than the performance of printed antenna
without matching circuit which has the ð‘†11 value of 15dB, the
-10dB bandwidth of 30MHz, and the gain achievement of -0.5dBi.
Moreover, the size of proposed antenna is reduced significantly
up to 60% compared to the conventional patch antenna.

Tahun : 2018 Media Publikasi : Seminar Internasional

Kategori : Prosiding No/Vol/Tahun : - / - / 2018

ISSN/ISBN : -

PTN/S : Universitas Pakuan Program Studi : TEKNIK ELEKTRO

Bibliography :
[1] F. Bilotti, A. Toscano, and L. Vegni, “Design of spiral and multiple
split-ring resonators for the realization of miniaturized metamaterial
samples,” IEEE Trans. Antennas Propag., Vol. 55, No. 8, pp. 2258–
2267, Aug. 2007.
[2] A. A. Fashi, M. Kamyab, and M. Barati, “A novel small resonant
antenna using the meta-materials array, in Proceedings of Progress In
Electromagnetics Research Symposium (PIERS), Moscow, Russia, Aug.
2010, pp. 670–674.
[3] E. T. Rahardjo, W. Yuswardi and, F. Y. Zulkifli, “Size reduction of microstrip
antenna with CRLH-TL metamaterial and partial ground plane
techniques,” in Proceedings of International Symposium on Antennas
and Propagation (ISAP), Nagoya, Japan, Oct.-Nov. 2012, pp. 898–901.
[4] A. Harish, M. R. Hidayat, L. O. Nur, B. S. Nugroho, and A. Munir,
“Spiral-shaped printed planar inverted-F antenna for body wearable
application,” in Proceedings of 11th International Conference on Telecommunication
Systems Services and Applications (TSSA), Lombok,
Indonesia, Oct. 2017, pp. 1–4.
[5] Chairunnisa, Sutinah, and A. Munir, “Metasurface-backed monopole
printed antenna with enhanced bandwidth,” in Proceedings of International
Symposium on Antennas and Propagation (ISAP), Phuket,
Thailand, Oct.-Nov. 2017, pp. 1–2.
[6] J. D. Baena, R. Marqu‘es, F. Medina, and J. Martel, “Artificial magnetic
metamaterial design by using spiral resonators,” Phys. Rev. B, Vol. 69,
No. 1, 014402 (pp. 5), Jan. 2004.
[7] K. Buell, H. Mosallaei, and K. Sarabandi, “A substrate for small
patch antennas providing tunable miniaturization factors,” IEEE Trans.
Microw. Theory Techn., Vol. 54, No. 1, pp. 134-146, Jan. 2006.
[8] S. Jahani, J. Rashed-Mohassel, and M. Shahabadi, “Miniaturization of
circular patch antennas using MNG metamaterials,” IEEE Antennas
Wireless Propag. Lett., Vol. 9, pp. 1194–1196, Dec. 2010.
[9] T. N. Mai, A. C. Lepage, and B. Huyart, “Co-designing a compact antenna
with a variable matching network using varactors,” in Proceedings
of 7th European Conference on Antennas and Propagation (EuCAP),
Gothenburg, Sweden, Apr. 2013, pp. 880–884.
[10] M. Yunus, F. Y. Zulkifli, ans E. T. Rahardjo, “Radiation characteristics
of a novel ðœ‡ negative metamaterial spiral resonator antenna at the 2.4
GHz,” Open Journal of Antennas and Propagation, Vol. 4, No. 1, pp. 1–
11, Mar. 2016.
[11] A. Munir, S. Aviolanda, and E. Bharata, “Wideband printed dipole
antenna fed using modified planar marchand balun,” in Proceedings of
International Electronics Symposium (IES), Denpasar, Indonesia, Sep.
2016, pp. 295–298.
[12] M. Ando and H. Hirayama, “Impedance matching using folded spiral
antenna for coupled-resonant wireless power transfer,” in Proceedings
of International Symposium on Antennas and Propagation (ISAP),
Okinawa, Japan, Oct. 2016, pp. 56–57.
[13] O. S. Ginting, Chairunnisa, and A. Munir, “Proximity-coupled L-band
patch array antenna fed by binomial power distribution,” in Proceedings
of IEEE Asia Pacific Microwave Conference (APMC), Kuala Lumpur,
Malaysia, Nov. 2017, pp. 554–557.

URL :

Document

back

@official_unpak	@unpak
@unpak	UNPAK TV

Welcome Repository Universitas Pakuan

Student's Achievments

Unggul, Mandiri & Berkarakter

Detail Karya Ilmiah Dosen

Mochamad Yunus

Judul	:	Size Reduction of Printed Antenna Based on Spiral Resonator Incorporated with Matching Circuit for Performance Enhancement
Abstrak	:	The development of wireless communication system often requires the device with compact size and light weight. To satisfy the requirement, the device should comprise of small parts, in which one of them is using printed antenna. Many researches on size reduction of printed antenna have been conducted. By using spiral resonator (SR) shape incorporated with matching circuit, in this paper, the size reduction of printed antenna is presented which is aimed to enhance the antenna performance. The proposed antenna is designed using two layers of 1.6mm thick FR4 dielectric substrate with a proximity coupled technique applied as the feeding system. It is found that the proposed technique offered the proposed antenna to have the ð‘†11 value of 25dB, the bandwidth of 40MHz, and the gain achievement of 2.3dBi. This is better than the performance of printed antenna without matching circuit which has the ð‘†11 value of 15dB, the -10dB bandwidth of 30MHz, and the gain achievement of -0.5dBi. Moreover, the size of proposed antenna is reduced significantly up to 60% compared to the conventional patch antenna.
Tahun	:	2018	Media Publikasi	:	Seminar Internasional
Kategori	:	Prosiding	No/Vol/Tahun	:	- / - / 2018
ISSN/ISBN	:	-
PTN/S	:	Universitas Pakuan	Program Studi	:	TEKNIK ELEKTRO
Bibliography	:	[1] F. Bilotti, A. Toscano, and L. Vegni, “Design of spiral and multiple split-ring resonators for the realization of miniaturized metamaterial samples,” IEEE Trans. Antennas Propag., Vol. 55, No. 8, pp. 2258– 2267, Aug. 2007. [2] A. A. Fashi, M. Kamyab, and M. Barati, “A novel small resonant antenna using the meta-materials array, in Proceedings of Progress In Electromagnetics Research Symposium (PIERS), Moscow, Russia, Aug. 2010, pp. 670–674. [3] E. T. Rahardjo, W. Yuswardi and, F. Y. Zulkifli, “Size reduction of microstrip antenna with CRLH-TL metamaterial and partial ground plane techniques,” in Proceedings of International Symposium on Antennas and Propagation (ISAP), Nagoya, Japan, Oct.-Nov. 2012, pp. 898–901. [4] A. Harish, M. R. Hidayat, L. O. Nur, B. S. Nugroho, and A. Munir, “Spiral-shaped printed planar inverted-F antenna for body wearable application,” in Proceedings of 11th International Conference on Telecommunication Systems Services and Applications (TSSA), Lombok, Indonesia, Oct. 2017, pp. 1–4. [5] Chairunnisa, Sutinah, and A. Munir, “Metasurface-backed monopole printed antenna with enhanced bandwidth,” in Proceedings of International Symposium on Antennas and Propagation (ISAP), Phuket, Thailand, Oct.-Nov. 2017, pp. 1–2. [6] J. D. Baena, R. Marqu‘es, F. Medina, and J. Martel, “Artificial magnetic metamaterial design by using spiral resonators,” Phys. Rev. B, Vol. 69, No. 1, 014402 (pp. 5), Jan. 2004. [7] K. Buell, H. Mosallaei, and K. Sarabandi, “A substrate for small patch antennas providing tunable miniaturization factors,” IEEE Trans. Microw. Theory Techn., Vol. 54, No. 1, pp. 134-146, Jan. 2006. [8] S. Jahani, J. Rashed-Mohassel, and M. Shahabadi, “Miniaturization of circular patch antennas using MNG metamaterials,” IEEE Antennas Wireless Propag. Lett., Vol. 9, pp. 1194–1196, Dec. 2010. [9] T. N. Mai, A. C. Lepage, and B. Huyart, “Co-designing a compact antenna with a variable matching network using varactors,” in Proceedings of 7th European Conference on Antennas and Propagation (EuCAP), Gothenburg, Sweden, Apr. 2013, pp. 880–884. [10] M. Yunus, F. Y. Zulkifli, ans E. T. Rahardjo, “Radiation characteristics of a novel ðœ‡ negative metamaterial spiral resonator antenna at the 2.4 GHz,” Open Journal of Antennas and Propagation, Vol. 4, No. 1, pp. 1– 11, Mar. 2016. [11] A. Munir, S. Aviolanda, and E. Bharata, “Wideband printed dipole antenna fed using modified planar marchand balun,” in Proceedings of International Electronics Symposium (IES), Denpasar, Indonesia, Sep. 2016, pp. 295–298. [12] M. Ando and H. Hirayama, “Impedance matching using folded spiral antenna for coupled-resonant wireless power transfer,” in Proceedings of International Symposium on Antennas and Propagation (ISAP), Okinawa, Japan, Oct. 2016, pp. 56–57. [13] O. S. Ginting, Chairunnisa, and A. Munir, “Proximity-coupled L-band patch array antenna fed by binomial power distribution,” in Proceedings of IEEE Asia Pacific Microwave Conference (APMC), Kuala Lumpur, Malaysia, Nov. 2017, pp. 554–557.
URL	: