| Abstrak |
: |
Technique of Rapid Breakdown Anodization (RBA) is the new anodisasi technique
introduced in 2009 as super fast synthesis methods for producing TiO2 powder. The
development of this technique continues to be done in order to obtain the best quality of TiO2
powders according to the needs of the application. At this time the experiment reported the
existence of the influence the granting of potential anodisasi currently underway against
TiO2 powder produced good particle size, surface area and shape of the morfologinya. In
addition, observations on the reaction time is also conducted to take into account the
efficiency. From the results of the experiment, potential variations below 20 V, i.e., 10, 13, 14
and 15 V, it can be reported that the plate It can be transformed into the perfect TiO2
powder on electrochemical reaction of potential system 15 V for approximately 3 hours in
perchloric acid media 0.15 M. Whereas the process of potential reactions on 10, 13 and 14 V
does not produce TiO2 powder significantly in the time of observation for 7 hours. So further
study focused on the synthesis of TiO2 powder results in a potential 15 V which will be
compared with the potential 20 V, which is a potential that is used when this technique was
first introduced. From the results of the experiment, reported on the potential RBA
engineering 15 V produces TiO2 powder with a size outer diameter are smaller, i.e. an
average of 84 nm with a more uniform particle size and surface area of the Crystal results
kalsinasi at 500oC generated on 15 potential V is wider with a more uniform morphology, i.e.
69.723 g/m2 compared to 20 V , i.e. 63.824 g/m2. This will provide a significant influence in
the activity of the fotokatalitik used for the fotodegradasi, as well as its application as DSSC
(Dye Sensitized Solar Cells)
|
| Bibliography |
: |
Antony, Rajini P., Mathews, Tom, Ramesh
C., Murugesan, N., Dasgupta, Arup.,
Dhara, S., Dhara, Dash, S., Tyagi,
A.K. (2012).Efficient photocatalytic
hydrogen generation by Pt modified
TiO2 nanotubes fabricated by rapid
breakdown anodization.international
journal of hydrogen energy 37
(2012) 8268e8276.
Antony, Rajini P., Mathews, Tom.,
Dasgupta, Arup., Dash, S., Tyagi,
A.K., Raj, Baldev. (2011) . Rapid
breakdown anodization technique
for the synthesis of high aspect ratio
and high surface area anatase TiO2
nanotube powders.
Arunchandran, C., Ramya, George, R.P.
U. Mudali, Kamachi. (2013).
Corrosion inhibitor storage and
release property of TiO2 nanotube
powder synthesized by rapid
breakdown anodization method.
Materials Research Bulletin 48
(2013) 635–639.
Byranvand, M. Malekshahi., Bazargan,
M. H., Kharat, A. Nemati. (2012).
The Method For Preparing Anatase
Titania Nanoparticles: Application
to Flexible Dye Sensitized Solar
Cells. Proceedings of the 4th
International Conference on
Nanostructures (ICNS4) 12-14
March, 2012, Kish Island, I.R. Iran
Elsanousi, Ammar, Elamin, Nazar, Elhouri,
Sawsan, Abdallah, Amel. (2013).
Highly Ordered TiO2 Nanotubes
and Their Application to Dye
Sensitized Solar Cells. Journal of
Applied and Industrial Sciences,
April, 2013, 1 (1): 39-42.
Fahim, Narges F., Sekino, Tohru. (2011).
Anodic TiO2 nanotubes powder
and its application in dye-sensitized
solar cells. J Nanopart Res (2011)
13:6409–6418 DOI 10.1007/s11051
-011-0393-0
Grätzel, M., Mc Evoy A.J., (2004).
Principles and applications of dye
sensitized nano-crystalline solar
cells (DSC), Asian J. Energ. Env. 5
(2004) 197-210.
Grätzel, M., (2001).Photoelectrochemical
cells, Nature 414 (2001) 338.
Handoyo, Henry. (2013).Sel Surya
Tersensitasi Zat Warna Berbasis
TiO2 yang Dimodifikasi Dalam
Konfigurasi Tabung. Tesis
Departemen Kimia Universitas
Indonesia
Jha, Himendra., Roy, Poulomi., Hahn,
Robert., Paramasivam,Indhumati.,
Schmuki, Patrik. (2011).Fast
formation of aligned high-aspect
ratio TiO2 nanotube bundles that
lead to increased open circuit
voltage when used in dye sensitized
solar cells. Electrochemistry
Communications 13 (2011) 302–
305.
|
@official_unpak
@unpak
@unpak
UNPAK TV