Repository Universitas Pakuan

Detail Karya Ilmiah Dosen

Eneng Tita Tosida, Apri Diana Sanurbi, Atik Wartini

Judul : Optimization of Indonesian Telematic SMEs Cluster : Industry 4.0 Challenge
Abstrak :

Abstract. Indonesia’s economic are strengthened by 99% of SME players, and one of the growing field of Indonesia’s SMEs is telematics SMEs. Increasing SMEs Telematics Services in Indonesia is a potential, that must be supported to have a competitive value, especially in facing Industrial 4.0. But there are many difficulties in determining the decision to provide assistance to SMEs who really need. One of the causes is the number of data and the qualification standard to decide the feasibility of SMEs to be given assistance. The puposeof  this research is to explain the optimization process of the formation of the Indonesian telematic SMEs cluster, which are potential to be given assistance, and to face the challenges of Industrial 4.0. The cluster optimization process is carried out by Partitioning Around Medoids (PAM) and Fuzzy C-Means (FCM). The data used is the data of SMEs Telematics Services in Indonesia according to the National Economic Census (Susenas) data in 2006 Indonesian Central Bureau of Statistics (CBS). The 2006 data usage is caused by the Susenas 2016 not yet released by Indonesian CBS. Even though the data used comes from Susenas 2006, it is still relevant to be analyzed and mapped into the current conditions. The cluster of Indonesian telematic SMEs was validated using SilhoutteCoeffisient which resulted in a value of upper then 0.99. The validation values of the two clustering techniques show a very strong cluster structure.

Tahun : 2018 Media Publikasi : Jurnal Internasional
Kategori : Jurnal No/Vol/Tahun : 1 / 7 / 2018
PTN/S : Konsorsium ICOGOIA Program Studi : ILMU KOMPUTER
Bibliography :


[1] Jian Qin, Ying Liu, Roger Grosvenor. 2016. A Categorical Framework of Manufacturing for Industry 4.0 and Beyond. Procedia CIRP 52 (2016) 173-178. Elsevier. doi: 10.1016/j.procir.2016.08.005

[2] Jaswadi, Mohammad Iqbal, Sumiadji. 2015. SME Governance in Indonesia – A Survey and Insight from Private. Procedia Economics and Finance 31 ( 2015 ) 387 – 398. Elsevier.

[3] Nasution LK, Murni M, Dewi IS, Supriyanto. 2017. The Implementation OfSakEtap And The Effect Of Umkm Preparation In Dealing With Mea (Asean Economic Society) (Case Study On UMKM Medan &Binjai In 2016). Journal Online JaringanPengajianSeni Bina (JOJAPS), Vol 10 – IRSTC 2017 &RESPEx 2017.

[4]  Tosida ET, Maryana S, Thaheer H, Damin FA. 2015. Visualization model of Small Medium Enterprises (SMEs) telematics services potentiality map in Indonesia. Published in:International Conference on Information & Communication Technology and Systems (ICTS), 2015. Added  toIEEExplorer. January 14th 2016. DOI: 10.1109/ICTS.2015.7379890.

[5]  Tosida, ET, KB Seminar, Y Herdiyeni. 2016. Atribut selection of Indonesian Telematic Services MSMEs Assisstance Feasibility, using AHP. Kursor 8 (2), 2016. DOI:

[6]  Tosida ET, H Thaheer, S Maryana. 2017a. StrategiPeningkatanDayaSaingmelalui Framework Rantai Nilai untukKompetensi Usaha JasaTelematika Indonesia. JurnalPenelitian Pos dan Informatika, 5 (1), p 1-18, 2017.

[7]  Tosida ET, S Maryana, H Thaheer. 2017b. Implementation of Self Organizing Map (SOM) as decision support : Indonesian telematics services MSMEs empowerment. IOP Conference Series : Materials Science and Engineering 166 (1), 012017. IOP Publishing.

[8]  Sommer L. 2015. Industrial Revolution - Industry 4.0: Are German Manufacturing SMEs the First Victims of this Revolution?.  Journal of Industrial Engineering and Management JIEM, 2015 – 8(5): 1512-1532. – Online ISSN: 2013-0953 – Print ISSN: 2013-8423. 1470.

[9]  Jones C, Pimdee P. 2017. Innovative Ideas : Thailand 4.0 and the fourth industrial revolution. Asian International Journal of Social Sciences, 17(1), 4 – 35.

[10] Pereira T, L Barreto, A Amaral. Network and Information Security Challenges within Industry 4.0. Paradigm. 2017. Procedia Manufacturing 13 (2017) 1253-1260. Manufacturing Engineering Society International Conference 2017, MESIC 2017, 28-30 June  2017, Vigo (Pontevedra), Spain. Elsevier.

[11] Mishra, D., &Hiranwal, S. 2014. Analysis & implementation of item basedcollaboration filtering using K-Medoid. Paper presented at 2014 International Conference on the Advances in Engineering and Technology Research (ICAETR).

[12] Hadighi SA, Sahebjamnia N, Mahdavi I, Shirazi MA. 2013. A framework for strategy formulation based on clustering approach : A case study in a corporate organization. Knowledge-Base Systems, 49 (2013), 37-49.

[13] Lee H, Lee S,  Byungun Y. 2011. Technology clustering based on evolutionary patterns : The case of information and communications technologies. J. Technological Forecasting & Social Change, 78 (2011) 953-967. DOI : 10.1016/j.techfore.2011.02.002

[14] Dhewanto W, Prasetio EA, Ratnaningyas S, Herliana S, Cherudin R, AinaQorri, Bayuningrat RH, Rachmawaty E. 2012. Moderating effect of cluster on firms innovation capability and business performance : A conceptual framework. Procedia-Social and Behavioral Science Vol. 65: 867-872. doi: 10.1016/j.sbspro.2012.11.212.

[15] Han, J., Kamber M, Pei J. 2012. Data mining : Concepts and techniques. Third Edition. Morgan Kaufmann is an imprint of Elsevier, 225Wyman Street,Waltham, MA 02451, USA.

[16] Julazadeh, A., M. Marsousi&J. Alirezaie. 2012. Classification based on sparse representation and Euclidian distance. Paper presented at IEEE the Visual Communications and Image Processing (VCIP).

[17] AndraBenesova, Jiri Tupa. 2017. Requirements for Education and Qualification of People in Industry4.0. Procedia Manufacturing 11 (2017) 2; 27th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM2017, 27-30 June 2017, Modena, Italy. doi: 10.1016/j.promfg.2017.07.366

[18] Daniel Palacios-Marqués, Pedro Soto-Acosta, José M. Merigó. 2015. Analyzing the effects of technological, organizational and competition factors on Web knowledge exchange in SMEs. J. Telematics and Informatics 32 (1) : 23–32. Elsevier, j.tele.2014.08.003.0736-5853/@2014.

[19] McGuirk H, Lenihan H, Hart M. 2015. Measuring the impact of innovation human capital on small firms propensity to innovative. J. Research Policy, Vol.44 (4) : 965-976. Elsevier. doi:

[20] Biro Pusat Statistik. 2017. Laporan PDB EkonomiKreatifTahun 2014-2016. KatalogBPS : 9301007. Biro Pusat Statistik. Jakarta. ISBN : 978-602-438-190-5.

[21] Tosida ET, O Hairlangga, F Amirudin, M Ridwanah. 2018. Appication of Decision Rules for Empowering of Indonesian Telematics Services SMEs. IOP Conference Series : Materials Science and Engineering 332 (1), 012018. IOP Publishing. 10.1088/1757-899X/332/1/012018/pdf.




  1. DRPM RistekDikti, as the main sponsor, which gives us Competitive Grants Scheme
  2. Computer Science Department, Mathematics and Natural Science Faculty, PakuanUniversity,and Research Institute Pakuan University, for supporting, coordinating and facilitating to achieve this grants.
  3. Indonesian Communication & Information Ministry, Indonesian Cooperation and SMEs Ministry and Bandung Technopark for active participation in the activities of interviews anduser requirement.